User guide

3.7 Gateway Ubee Interactive
30 DDW3612 Subscriber User Guide • July, 2010
3.7.10 Gateway - Port Filtering
The Port Filtering option allows you to configure port filters in order to block specific
internet services on specific ports to all devices on the LAN.
1. Access the web interface. Refer to page 7, if needed.
2. Click the Gateway link from the top of the screen.
3. Click Port Filtering from the left side of the screen. The Port Filtering fields are
explained following this screen example.
Label Description
Start Port Enter the start port.
End Port Enter the end port.
Protocol Select the protocol type, or select Both for UDP and TCP.
Enabled Select Enabled to active the rule and filter out all traffic on the
specified ports.
Apply Click Apply to save all screen changes.