User guide

Ubee Interactive 3.7 Gateway
DDW3612 Subscriber User Guide • July, 2010 29
3.7.9 Gateway - IP Filtering
The IP Filtering option allows you to filter IP addresses in order to block internet
traffic to specific network devices on the LAN. Any host listed on this list will not be
accessible to internet traffic.
1. Access the web interface. Refer to page 7, if needed.
2. Click the Gateway link from the top of the screen.
3. Click IP Filtering from the left side of the screen. The IP Filtering fields are
explained following this screen example.
Clear Select Clear to delete the filtering rule.
View Additional Rules: Select from the pull-down to display the remaining 10 rules, if
they exist. 20 rules total are supported.
Apply Click Apply to save all screen changes.
Label Description
Start Address Enter the start IP address.
End Address Enter the end IP address.
Enabled Select Enabled to activate the rule.
Apply Click Apply to save all screen changes.