User guide

3.7 Gateway Ubee Interactive
22 DDW3612 Subscriber User Guide • July, 2010
3.7.3 Gateway - DHCP
The DHCP option allows you to configure DHCP-specific behavior on the device.
1. Access the web interface. Refer to page 7, if needed.
2. Click the Gateway link from the top of the screen.
3. Click DHCP from the left side of the screen. The DHCP fields are explained
following this screen example.
WAN Connection Type Select the WAN connection type. For each type, different
data entry is required, as explained below:
1.DHCP: The WAN interface is set to be a DHCP client,
and the IP address is assigned by the service provider’s
DHCP server.
2.Static IP: For Static IP, you must manually enter the IP
address for the WAN interface.
3.PPTP (DHCP): For Point to Point Tunneling Protocol
(PPTP), you must enter a username, password, and the
PPTP server’s IP address.
Host Name Enter the host name for the router. This may be required by
some service providers.
Domain Name Enter the domain for the router. This may be required by
some service providers.
MTU Size Enter the Maximum Transmission Unit size, which defines
the largest size of the packet or frame that the device can
transfer (256-1500). If this is not given by the Service
Provider, leave it as is using 0 for the default.
Apply Click to save all changes made in the screen.
Label Description