User guide

Ubee Interactive 3.5 Cable Modem - Operation Config
DDW3612 Subscriber User Guide • July, 2010 17
Label Description
Network Access Displays the status of cable modem, Denied means no
connectivity is established. Allowed means connectivity is
established to Internet.
Maximum Number of CPEs Displays the maximum number of Ethernet devices that
can be connected (LAN side) to access the
network/internet at the same time.
Baseline Privacy Displays highlighted device configurations, like PHS
Enabled and the other examples shown in the screen
example.
DOCSIS Mode Displays the DOCSIS version used in the device.
Primary Downstream Service Flow
SFID Displays the frequency ID of the downstream service flow.
Priority Displays the use priority of the frequency ID.
Max Traffic Rate Displays the max data rate as enabled by the service
provider.
Max Traffic Burst Displays the max data rate as enabled by the service
provider for downstream data bursts.
Max Concatenated Burst Displays the max data rate per downstream burst.
Primary Upstream Service Flow
SFID Displays the frequency ID of the upstream service flow
Priority Displays the use priority of the frequency ID.
Max Traffic Rate Displays the max data rate as enabled by the service
provider.
Max Traffic Burst Displays the max data rate as enabled by the service
provider for upstream data bursts.
Min Traffic Rate Displays the minimum data rate as enabled by the service
provider.
Max Concatenated Burst Displays the max data rate per upstream burst.
Scheduling Type Displays the data scheduling type.