User guide

3.5 Cable Modem - Operation Config Ubee Interactive
16 DDW3612 Subscriber User Guide • July, 2010
3.5 Cable Modem - Operation Config
This section explains how to use the Operation Config screen of the web interface.
The Operation Config screen displays general information on the device’s active
operational capabilities.
1. Access the web interface. Refer to page 7, if needed.
2. Click the Operation Config link from the left side of the screen. Field explanations
are listed below the following screen example.
Modulation Displays the current cable modem upstream modulation
type (QPSK/ QAM8 /QAM16/ QAM32/ QAM64/ QAM128/
QAM256).
Symbol Rate Displays the symbol rate (Ksym/sec).
Upstream Mini-Slot Size Displays the current cable modem upstream mini-slot size
in Timebase Ticks of 6.25.
Power Level Displays the current cable modem upstream transmit
power (dBmV).
T-1 through T-4 Timeouts T-1-Displays DHCP time expiration, T-2-Displays DHCP
time expiration, T-3-Displays RNG-RSP time expiration, T-
4-Displays RNG time expiration.
Label Description