User guide

Ubee Interactive 3.2 Cable Modem - Status
DDW3612 Subscriber User Guide • July, 2010 13
3.2 Cable Modem - Status
This section explains how to use the Status screen of the web interface. The Status
screen displays the device’s general connection information.
1. Access the web interface. Refer to page 7, if needed.
2. Click the Status link from the left side of the screen. Field explanations are listed
below the following screen example.
Label Description
Acquired
Downstream
Channel
Displays a Downstream channel that the cable modem is trying to
lock to and the progress.
Ranged Upstream
Channel
Displays an Upstream channel that the device is trying to range with
and the progress.
CM Provisioning
State
After the physical initialization, the cable modem will be configured
by a DHCP server from the service provider. Once the cable modem
obtains an IP address, the cable modem’s status is OK. The Status
column also shows the connection progress. The Comments column
displays the messages indicating connection error information, if
errors occur.
Refresh Click to refresh the status information.