User's Manual

Ubee Interactive — www.ubeeinteractive.com
3 Ubee UBC1307-CA00 – Safety and Installation Product Insert v1.1
the device by first touching the
coaxial connector of the coaxial
cable.
7. Installation of the device should
include grounding the coaxial cable
to the earth at the building entrance
per ANSI/NFPA 70 and the National
Electrical Code (NEC, in particular,
Section 820.93, Grounding of the
Outer Conductive Shield of a Coaxial
Cable).
8. The device is designed for IT power
systems with phase-to-phase voltage
at 100-240V.
9. Disconnecting the Device: If the
device becomes damaged or
encounters some other abnormality,
disconnect the power plug from the
AC wall outlet immediately.
10. The device should be installed in a
location not to exceed the maximum
temperature of 40 degrees Celsius
(104 degrees Fahrenheit).
11. When the device is placed upright
with the aid of the stand, the stand
must be fixed at a 90 degree angle to
the device. Otherwise, the device will
have the risk of tipping over. This is
the recommended position for best
Wi-Fi performance

12. Keep the device away from Children
and Pets
13. Place the device on a cool surface.
Failure to do so may result in
overheating which can cause
extreme damage.
14. Do not modify or attempt to
disassemble the device. Use it only
according to the instructions.
15. Do not dispose of the device in a
trash container. Please recycle.