User's Manual

Ubee Interactive — www.ubeeinteractive.com
7 Ubee DVW32H – Safety and Installation Product Insert v1.1
laptop, computer, etc.
WPS LED— When a user pushes the WPS
button or triggers WPS via the device’s web GUI,
this LED on the front of the device flashes Green
for 2 minutes until a PIN is entered from a
wireless client wishing to connect (e.g. a laptop
computer). After a Wi-Fi client attaches
successfully, the LED remains On (green) for 5
minutes, then turns Off.
LAN1/LAN2/LAN3/LAN4—The Ethernet ports
are used to connect Ethernet devices, such as
computers, gaming consoles, and/or
routers/hubs to the Device using RJ45 cables.
Each Ethernet port has an LED to indicate their
statuses when an Ethernet device is connected.
When an Ethernet device, is connected to the
cable modem, the LED is Green when connected
at 10/100 Mbps speeds. The LED is Blue when
connected at 1000 (Gigabit Ethernet) speed.
When data is being passed between the Device
and the connected laptop, computer, etc, the
LED flashes with same color scheme (i.e. green
for 10/100Mbps or blue for Gigabit).