User's Manual

Ubee Interactive — www.ubeeinteractive.com
3 Ubee DDW36A – Safety and Installation Product Insert v1.0
6. Avoid static discharge when
touching the device by first
touching the coaxial connector of
the coaxial cable.
7. Installation of the device should
include grounding the coaxial cable
to the earth at the building entrance
per ANSI/NFPA 70 and the
National Electrical Code (NEC, in
particular, Section 820.93,
Grounding of the Outer Conductive
Shield of a Coaxial Cable).
8. The device is designed for IT power
systems with phase-to-phase
voltage at 100-240V.
9. Disconnecting the Device: If the
device becomes damaged or
encounters some other abnormality,
disconnect the power plug from the
AC wall outlet immediately.
10. The device should be installed in a
location not to exceed the
maximum temperature of 40
degrees Celsius (104 degrees
Fahrenheit).
11. When the device is placed upright
with the aid of the stand, the stand
must be fixed at a 90 degree angle to
the device. Otherwise, the device will
have the risk of tipping over. This is
the recommended position for best
Wi-Fi performance
12. Keep the device away from Children
and Pets
13. Place the device on a cool surface.
Failure to do so may result in
overheating which can cause
extreme damage.
14. Do not modify or attempt to
disassemble the device. Use it only
according to the instructions.
15. Do not dispose of the device in a
trash container. Please recycle.