User's Manual

Ubee Interactive — www.ubeeinteractive.com
7 Ubee DVW326B – Safety and Installation Product Insert
On-line—When the device is obtaining an IP
address and configuration file, the LED flashes.
When device obtains these items, the LED is On.
Wi-Fi—When Wi-Fi is enabled, the LED is On.
When Wi-Fi is disabled, the LED is Off.
TEL1 and TEL2—The LED is On when a
telephone is on-hook. The LED flashes when a
telephone is off-hook. TEL1 or TEL2 is Off when
the corresponding line is not provisioned.
Battery—LED is On when the battery is installed
and charged. LED is Off if no battery is installed.
If the battery is at low power level (30mins left),
the battery LED will flash.
WPS (top of device)—If not used, the LED is Off.
When the user pushes the WPS button or
triggers WPS via the device’s web GUI, the LED
flashes white for 4 minutes until a PIN is entered
from a wireless client that wishes to connect.
After a Wi-Fi client attaches successfully, the
LED remains solid white for 5 minutes, and then
turns off.
Back Panel Ethernet Indicators
(Color = Orange or Green):
• When an Ethernet device, such as a computer,
is connected to the device, the LED is Orange
when connected at 10/100 Mbps speeds.
• When an Ethernet device, such as a computer,
is connected to the device, the LED is Green
when connected at 1000 Mbps speeds
(Gigabit Ethernet).
• When data is being passed between the
device and the connected device, the LED
flashes.