User Manual

HON HAI PRECISION IND. CO., LTD.
4
2 Product Specification
2.1 Hardware Specification
Wireless LAN Standards IEEE 802.11 a/b/g/n
Operating Frequency 2400~2483.5MHz, 5150~5250MHz, 5725~5850MHz
WLAN Data Rate 802.11a/g: 54Mbps with fall back of 48, 36, 24, 18, 12, 9, 6Mbps.
802.11b: 11Mbps with fall back rates of 5.5, 2, and
1Mbps
11n: MCS8~MCS15
Transmitter Output Power Typical 10.0dBm(AV) for 11a
Typical 15.5dBm(AV) for 11b
Typical 15.5dBm(AV) for 11g
Typical 14.5dBm(AV) for HT20
Typical 13.5dBm(AV) for HT40
Receiver Sensitivity Typical –65dBm for MCS15 (HT40) @ 10% PER
Typical –67dBm for MCS14 (HT40) @ 10% PER
Typical –68dBm for MCS13 (HT40) @ 10% PER
Typical –71dBm for MCS12 (HT40) @ 10% PER
Typical –73dBm for MCS11 (HT40) @ 10% PER
Typical –76dBm for MCS10 (HT40) @ 10% PER
Typical –79dBm for MCS9 (HT40) @ 10% PER
Typical –82dBm for MCS8 (HT40) @ 10% PER
Typical –70dBm for MCS15 (HT20) @ 10% PER
Typical –72dBm for MCS14 (HT20) @ 10% PER
Typical –73dBm for MCS13 (HT20) @ 10% PER
Typical –76dBm for MCS12 (HT20) @ 10% PER
Typical –79dBm for MCS11 (HT20) @ 10% PER
Typical –82dBm for MCS10 (HT20) @ 10% PER
Typical –83dBm for MCS9 (HT20) @ 10% PER
Typical –85dBm for MCS8 (HT20) @ 10% PER
Typical –74dBm for 54Mbps @ 10% PER
Typical –76dBm for 48Mbps @ 10% PER
Typical –86dBm for 18Mbps @ 10% PER
Typical –89dBm for 6Mbps @ 10% PER
Typical –89dBm for 11Mbps @ 8% PER
Typical –94dBm for 1Mbps @ 8% PER
3. Product Requirements
3.1 Hardware Requirements
Host Interface PCI-E
3.2 Hardware Architecture
This specification describes an embedded 802.11a/b/g/n WiFi interface PCA
‘module’ for embedded device products. The module has two antennae. This
module is powered from the host (3.3V) and interfaces to the host with PCIE-half
signals. No switches, indicators or related user interface signals are provided on
this module. An on-board 20 MHz XTAL is included.