operation manual
Operating instructions ANIMAL REPELLENT
The device eectively and gently drives away herons, birds, dogs, cats, rabbits, wild animals etc. from the property and keeps grey herons away from the pond.
Please read these operating instructions carefully and store them in a safe place.
Power supply 3 rechargeable batteries AA 1.2 V NiMH 800 mAh (not included)
Coverage PIR Sensor 10m, 110º
Range of water jet up to 10 m (adjustable and subject to water pressure)
Eective range up to 95 m
Sprinkler setting right/left and top/bottom
Water intake Connection for garden hose 13mm (1/2")
Water consumption approx. 2-3 cups per activation
Technical data
Safety instructions
• The device may not be operated in case of visible damage
• Never open the device or parts thereof
• The device is not suitable for usage by persons (incl. children) with reduced physical, sensory or mental abilities or a lack of experience or know-how, unless
they are supervised by a person responsible for their safety or received instructions with respect to the use of the device. Children have to be supervised to
ensure that they do not play with the device.
• Store device and batteries out of the reach of children.
Activation
1. Screw the sprinkler head to the top of the device by turning clockwise.
2. Open the battery cover at the bottom of the device, insert 3 rechargeable AA batteries (not included) and close the battery compartment again.
Note: Please ensure that the batteries are fully charged. For this purpose, set the sensitivity control to 0 and expose the solar panel to full sun for 2 days. Alterna-
tively, you can charge the batteries in an external charger.
4. Mount the solar panel on the side of the main device and connect the power cable to the socket (bottom of the main device).
5. Screw the water hose connection to the lower side of the main device.
6. Plug the ground spike in the opening provided at the bottom of the main device.
7. For optimum eect, place the device pointing in the direction wherefrom the animals are coming.
8. Adjust the sensitivity and range of the motion detector commensurate with the area in which the device is to be eective.
Level 0 (OFF)
The motion detector is deactivated and the device is in stand-by mode. In this setting, the device does not recognise
movement and will not activate the water jet.
Levels 1-7 Turn the knob clockwise; this increases the sensitivity in the detection area.
Level 8
On this level, the device only operates in darkness (nocturnal animals).
Level 8 has the same range of coverage for the recognition of the motion detector as level 7.
Note: The solar panel has to be connected also on level 8.