TWS EARBUDS User Manual
Product Schematic Diagram
Packing List Bluetooth earbuds Charging case Micro USB charging cable User’s manual Extra ear gels Product Specifications Bluetooth Version: V5.0 Battery: earbuds 3.7V/40mah Charging box 3.7V/300mah Sensitivity: 105Db+/-3db S.P.L at 1KHz Transmission distance: 10 meters Play time: 3h Standby time: 36h Charging time: Charge the charging case about 1.
Place the earubds in the charging case and close the box. The earbuds will automatically begin charging. The indicates of the charging case is turning blue while charge the earubds and it will turn off after fully charged. Power On/Off/ Auto-pairing Power On: Option 1: To pair the earbuds simply remove them from the charging case. Doing so will automatically power on and pair the earbuds to one another. Power On: Option 2: Touch and hold the "Multifunction" button on either earbud to power it on manually.
Activating Siri (Or Other Phone AI) Touch and hold either multifunction button to prompt Siri (or other phone AI) to begin listening. After the phones AI has been activated the user should release the "Multifunction" button. Note: If the user continues to hold the "Multifunction" button the earbud will power off. Warning: The earbuds automatically power on and pair when charging has stopped. As such the user should make sure that the earbuds have been turned off after charging.
FCC Caution： This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
