Quick Manual
6
Quick Manual v1.0 // BTSID1, BTSMP1
CONFIGURATION
Devices work constantly and are ready to perform out of the box. Default basic Eye Beacon and Sensor settings
are set to:
• Transmitting at 2 dBm power.
• Data advertising at 3 second intervals.
• Eddystone protocol
If you would like to change these settings you will need to:
1) Download and install EYE APP - Teltonika application to change sensor settings.
With the application you will be able to scan for visible Teltonika EYE devices, check their statuses or connect for
conguration or rmware update.
*iOS doesn’t show devices
with iBeacon protocol