Tus neeg siv phau ntawv

VACUUM MACHINES

* Operating:

• Place the device in the plug.

• Press the ON-OFF button to start the appliance.

• Navigate with the up and down buttons on the control panel of the device and specify a

vacuum time between (1 and 5) sec.

• Put the products you want to vacuum in the tub, then close the tub cover. Make sure that the

valve cover on the top of the tub cover is correctly installed on the cover and the lid seal

completely presses the lid

• Hold the vacuum hose of the device in such a way that air will not leak onto the valve and

press the on-Off buttons to operate the device. (you can opeate the device with the 0-1 switch

that is on the device.)

• During vacuuming, ensure that the cover touches the container with a pressure.

• Pull the rubber cap on the lid to open the vacuum lid.

• Do not vacuum the tub for the second time. Otherwise, you can tear the tub cover from the

vacuum multi-weld.

• If the hot products in the device are vacuumed, open the 3 filter water discharge valves on the

side after each use and empty the water inside.

• Open the cover of the filter box every 15 days according to the usage intensity of the

appliance, clean the filters thoroughly and change them once a year. Otherwise vacuum motor

may be damaged.