VACUUM MACHINES CONTENTS A GENEREAL INFORMATION Page 2 A1 PRODUCT DESCRIPTION Page 3 A2 TECHNICAL INFORMATION Page 3 A3 TRANSPORTATION Page 4 A4 UNPACKING Page 4 B INSTALLATION Page 4 C SAFETY INSTRUCTIONS Page 5 D OPERATION Page 6 E CLEANING & MAINTENANCE Page 8 F TROUBLESHOOTING Page 9 G SPARE PART LIST- EXPLODING DRAWINGS Page 10 1
VACUUM MACHINES A GENERAL INFORMATION Before installing the appliance, read operation and maintenance instructions carefully.Wrong installation and part changing may damage the product or may cause injury on people.These are not in our company’s responsibility to damage the appliance intentionally,negligence,detriments because of disobeying instructions and regulations,wrong connections.Unauthorized intervention to appliance invalidates the warranty. 1.
VACUUM MACHINES A1 PRODUCT DESCRIPTION *Professional Vacuum Machine, that provides high efficiency has been designed to be used in industrial kitchens. Product Code Dimensions (mm) Weight (kg) Packaging Dimensions (mm) EMP.VCM.01-GN 280x495x370 36 300x515x370 A2 TECHNICAL INFORMATION Code EMP.VCM.
VACUUM MACHINES A4 UNPACKING *Please unpack the package according to the security codes and ordinances of current country and get rid from the pack.Parts which contacts with food are produced by stainless steel.All plastic parts are marked by material’s symbol. *Please check that all the parts of appliance had come completely and if they are damaged or not during the shipping.
VACUUM MACHINES C ! SAFETY INSTRUCTIONS *Do not use the appliance in insufficient lighted place. *Do not touch the moving attachments while the appliance operates. ! *Do not install the appliance in the presence of flammable or explosive materials. ! *Do not operate the appliance when the machine is empty. *Get the necessary cautions against electric danger. ! ! *Do not attempt to use the appliance without suitable protective equipments.
VACUUM MACHINES D OPERATION * Control Panel: A : ON/OFF BUTTON (MACHINE START BUTTON) B : ON/OFF BUTTON (SWITCH THE DEVICE ON AND OFF ) C: URGENT STOP BUTTON D: WORKING INDICATOR LED E: TIME INDICATOR SCREEN F: TIME SETTING UP BUTTON G: TIME SETTING DOWN BUTTON L : 0-1 (CUSTOMIZATION SWITCH ) 6
VACUUM MACHINES * Operating: • • • • • • • • • • Place the device in the plug. Press the ON-OFF button to start the appliance. Navigate with the up and down buttons on the control panel of the device and specify a vacuum time between (1 and 5) sec. Put the products you want to vacuum in the tub, then close the tub cover.
VACUUM MACHINES E CLEANING & MAINTENANCE Cleanıng And Maıntenance After Every Use ; • • • • Clean outer surface of appliance with hot water and then dry. Always turn off the appliance and disconnect from the power supply before cleaning. Do not use abrasive cleaning chemicals as these can leave harmful residues. Do not clean the appliance by spraying water directly,otherwise electrical part may get damaged.
VACUUM MACHINES F TROUBLESHOOTING 1. 2. THE APPLIANCE DOESN’T OPERATE 3. 1. 2. Make sure that the valve on the cover is correctly installed. Make sure that the cover surface of the tub you want to vacuum is correct. Vacuum pump must be closed during vacuuming Check the gasket if it is not closed. 3. If emergency stop button is pressed device stops operation. Please activate device. 1. The appliance can stop due to low voltage.In this situation check the voltage.
VACUUM MACHINES G SPARE PART LIST- EXPLODING DRAWINGS 1
VACUUM MACHINES G SPARE PART LIST- EXPLODING DRAWINGS PRODUCT CODE: EMP.VCM.01-GN NO 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 PRODUCT NAME P.CODE VACUUM PLASTIC. VACUUM HOSE 0-1 SWİTCH CONTROL CARD HANDLE LOCK CHROME FILTER PAPER FILTER INDICATOR SCREW INDICATOR BALL VALVE SQUARE FAN 80X80 MOTOR MOTOR VIBRATION ARC CONTACTOR DLEM-10 BRACKET SLEEVE Y.EMP.VCM.01-GN.001 Y.EMP.VCM.01-GN.002 Y.EMP.VCM.01-GN.003 Y.EMP.VCM.01-GN.004 Y.EMP.VCM.01-GN.005 Y.EMP.VCM.01-GN.006 Y.EMP.VCM.01-GN.
