Installation Guide

Method One: Using WPS Button(EN)

— 1 — — 2 —

1. Plug the extender next to your router, and wait until the

LED turns solid on.

2. Press the WPS button on your router, and then press the WPS

button on the extender within 2 minutes.

3. Then the LED will start to ﬂash，

wait until the LED and

LED turn solid on, which means the extender connects to

your existing host WiFi network.

If the LED does not turn solid on after 2 minutes, try step 2 again.

If still not work, try Method Two: Using Web Browser, or contact our

support team support@cudy.com.

4. Connect your device to the extender‘s WiFi network.

The extender’s new WiFi network name is based on your Host

WiFi network name, with —EXT2G or —EXT5G at the end of the

name.

For example:

• Host WiFi network name:

YourNetworkName

• New extended WiFi network name:

YourNetworkName—EXT2G

YourNetworkName—EXT5G

Use the same WiFi password that you use for your WiFi router.

Solid OnFlash

RESET

Press 1 second

WPS

Solid OnFlash

Connection process

Solid OnFlash

Pairing process