Installation & Assembly

Installing Handles

- 8 -

1. Press lever handles onto handle posts.

2. Test the mechanical operation of the lock by rotating

handle from inside. The movement of the bolt should be

smooth and unobstructed. If operation is not smooth,

review the previous steps to ensure proper installation.

If the handles are installed in wrong direction, you need to

remove them and re-install.

To remove the handle, you need to insert the screw driver

into the hole in the handle, push in and hold. Then pull the

lever handle out.

Congratulations!

You have installed the Ultraloq UL3

Fingerprint and Touchscreen Smart Lock successfully.