User Manual

U.S. Solid® • 1200 E.55th Unit C, Cleveland, OH, 44103 • www.ussolid.com

Thank you for choosing U.S. Solid’s Analytical Balance. We hope you enjoy your pur-

chase. Please maintain the equipment according to all instructions within the manual.

This product was developed according to CE marking regulations while emphasizing

aesthetics and safety for the user. It has ISO certication, specically ISO 9001 The high

quality of the product, coupled with proper user care, should allow you to enjoy the

product for years.

Improper use of this equipment can cause accidents, including but not limited to:

electric discharges, circuit breaker malfunctions, re, etc. Please read the mainte-

nance section, where this is explained more fully.

FOR BEST RESULTS AND LONGEVITY IN PRODUCT

EFFICACY, READ THROUGH THIS MANUAL THOROUGHLY

BEFORE USING THE PRODUCT

Please bear in mind the following:

• This manual should be kept with the analytical balance, so it is

available to all users

• Be careful when handling the balance. Avoid any sudden

movements when in its vicinity. Be sure to not drop the balance,

nor drop any heavy/sharp objects on it. Keep liquids away from the

balance to avoid spills.

• Never take apart the balance to try and x yourself. This could ruin

the entire balance, and voids the product warranty. There is also risk

of injury when disassembling the balance.

• To prevent re and electrical issues, avoid dusty or overly dry

environments. In case of electrical issue or re, unplug the balance

immediately.

• During setup, installation, and use, contact your wholesaler with any

questions that arise.

• This equipment is protected under the Warranties and Consumer

Good Regulation (10/2003)

• Overhaul is not covered by the equipment warranty

• Changes made to the product by non-certied individuals will result

in a loss of the product warranty

• Accessories, including their loss, are not covered by the product

warranty, nor does the warrant cover piece’s deterioration over the

course of time.

• Keep your invoice, either for having the right to a warranty, or for

asking for warranty coverage. Manufacturer reserves the right to

modify or improve the manual or equipment.

II. Getting Started