User Manual

U.S. Solid®•USS-DBS Models • All Rights Reserved • Page 10
U.S. Solid® • 1200 E.55th Unit C, Cleveland, OH, 44103 • www.ussolid.com
Troubleshooting Guide
Problem Cause Solution
Display not working No power supply Plug in the adapter
Display shows
“ “
Object weight
below minimum
threshold, taring
issues exist, or bal-
ance is not properly
calibrated.
Make sure item
being weighed is at
least 10mg. Make
sure receptacles
have been tared,
and the balance
has been properly
calibrated.
Display shows
“ “
Item being weighed
is over maximum
allowable weight.
Make sure balance
is properly cali-
brated, and make
sure item is below
maximum allowable
weight.
Display shows “Err-1” Power issues with
the balance.
Machine may have
a poor power con-
nection. Check the
power in the back,
and the outlet.
Leave machine o
for seveeral minutes,
unplug fully, then re-
connect and begin
again.
Display shows “Err-2” Unstable weighing
conditions.
Recalibrate ma-
chine, make sure
balance is level,
and make sure item
being weighed is
fully stable.