User Manual

How to use
 Warning
1. For your safety, be sure to connect under the state of power off.
2. Do not confuse the input end with the output end of the WiFi switch
module, and pay attention to the prompt on the panel.
1. Connect Circuit
1. Connect the input into the DC power
supply and then the output into the
device.
2. Open the handle to 90°, insert the
positive pole and the negative pole.
Then pull the handle down.
2. Download & Sign Up
1. Scan QR code above or download
App “Smart Life” from App store or
Google play.
2. Sign up and log in using email.
Tip: Only 2.4GHz is supported.