Technical data

PD_OpManPS-4_05_us.fm

page 34 PacDrive PS-4 / PD-8 ELAU AG

5 Maintenance

Hard-copy for correction

Fig. 5-4: Wire the PS-4/

 connection cable PS-4/PD-8 and fix the strain relief on the cable

duct while the cable is relieved

 Insert the prefabricated SERCOS cable into the outlet and snap

it on. Fix the strain relief on the cable duct while the cable is

relieved

 If more PD-8s are connected, connect prefabricated "PD-8/PD-

8" connection cable with the power in/out connections and the

next SERCOS cable with SERCOS in/out as described above.

CAUTION!

Penetrating liquid due to inexpert installation of cable ducts or

missing blind plugs!

Damage to electrical parts!

 Check if the cable ducts are tight.

 Immediately replace missing or defective blind plugs on unused

cable ducts. Do not run the PD-8 without having fixed the blind

plugs and checked if they are tight.

 Do not run the PD-8 while the cover is open. Before starting the

plant, close the cover and check if it is tight.