Manual

A - 8 HydraPort 100, 200, 400 - 56091029 11/11
INSTRUCTIONS FOR USE
REVISED DATE
ENGLISH
KNOW YOUR SWITCHPLATE
A Circuit Indicator (green) - When this light is on, it indicates that the two cords are plugged into separate circuits (not used on 100SC
model). NOTE: if this indicator light is not turned on, you may have both power cords on the same circuit and this can trip the circuit breaker
in the wall.
B Vacuum Switch - This switch turns the vacuum motor ON and OFF.
C Pump Switch – This switch turns the pump ON and OFF.
D Heat Switch - The heat switch turns the heater ON and OFF.
E Pressure - This label identifi es the maximum pressure of your machine.
CAUTION!
The circuit breaker in the wall panel can trip if both cords are on the same circuit.
A B C E D