Specifications
60
®
N
O
D
E
C
O
C
.
Z
.
D
E
C
O
C
.
Z
.
O
2
CARE AND CLEANING
The Data Plus 2 must be protected from shock, excessive heat, chemical at-
tack, and tampering. The housing, made of an impact resistant resin, is ex-
tremely shock resistant but susceptible to chemical attack and scratches. To
protect the lens against scratches, place a transparent Oceanic Instrument
Lens Protector on it. If it becomes scratched, Oceanic can replace it, although
small scratches will naturally disappear underwater.
AFTER THE DIVE
Soak and rinse the Data Plus 2 in fresh water following each dive, and check
the low pressure sensor guard cap to ensure that it is free of any debris or ob-
structions. If possible, use lukewarm water to dissolve any salt crystals. Salt
deposits can also be dissolved using a slightly acidic vinegar/water bath. After
removal from a fresh water bath, place the Data Plus 2 under gently running
water and towel dry before storing. Transport cool, dry, and protected.
ANNUAL INSPECTIONS AND SERVICE
Your Data Plus 2 should be inspected annually by an Authorized Oceanic
Dealer who will perform a factory prescribed function check and inspection for
damage or wear. To keep the 2 year limited warranty in effect, this inspection
Prevent
Scratches with
an Oceanic
Lens Protector