Specifications

49
Data Plus 2
Once all required decompression has been completed, the Data Plus 2 will
switch to the No Decompression Dive Mode. This is indicated by Total Ascent
Time = 0:00, and the Tissue Loading Bar Graph receding into the yellow Cau-
tion Zone. Time Dive Remaining now appears in place of Total Ascent Time .
VIOLATION MODES
It is important to understand each different Violation Mode and how to carry
out emergency procedures in the event you enter one.
While in Violation Modes, the Secondary and Alternate displays previously de-
scribed can be accessed using the Advance (Left) button, and the Oceanglo
®
backlight can be activated using the Select (Right) button.
CONDITIONAL VIOLATION MODE
The Data Plus 2 will enter Conditional Violation Mode if you ascend shal-
lower (Fig. 57a) than the required decompression ceiling indicated by
the Required Stop Depth displayed (Fig. 57b). The Total Ascent Time
display (Fig. 57c) will flash until you descend below the Required Stop Depth.
If you descend below the required decompression ceiling before 5 minutes have
elapsed, the Data Plus 2 will continue to function as if no violation had oc-
curred. In this case, no off-gassing credit will be given, and for each minute
Fig. 57 - Conditional
Violation
FT
FT
N
O
D
E
C
O
C
.
Z
.
D
E
C
O
C
.
Z
.
O
2
a
b
c