Specifications

Data Plus 2

FO2 50% Default

If the Default is set to 'On' and FO2 is set to a value 'greater than 21%', the

FO2 value will automatically revert to 50% 10 minutes after that dive.

• FO2 must be reset for each repetitive nitrox dive, or the value will auto-

matically 'default' to 50 (Fig. 23) and the dives will be calculated based on

50% O2 for oxygen calculations and 21% O2 (79% nitrogen) for nitrogen

calculations.

• If you surface for greater than 10 minutes during a dive, a subsequent

descent will be considered a new dive and the FO2 value must be reen-

tered.

If the Default is set to 'Off', the FO2 value for repetitive dives remains the

same until the FO2 set point is manually changed.

FO2 Set for an Air Dive

When set with an FO2 value of 'Air', the Data Plus 2 will perform calculations

the same as if FO2 were set for 21% oxygen, internally accounting for oxygen

loading for any subsequent Nitrox dives. However, oxygen related displays,

warnings, and the O2 Bar Graph will not appear on the display for that dive

(Fig. 24), or subsequent dives, unless FO2 is set for a numerical value (21 to

50%).

Fig. 24 - FO2 'Air'

Fig. 23 - FO2 Default