Specifications
14
®
N
O
D
E
C
O
C
.
Z
.
D
E
C
O
C
.
Z
.
O
2
ACTIVATION
To activate the Data Plus 2, press the Select (Right) button once and release.
The Data Plus 2 will immediately enter Diagnostic Mode, displaying all “8’s”
(Fig. 11), followed by “dashes”, and a countdown from 9 to 0. While conduct-
ing diagnostics, the display is illuminated by the Smart Glo™ backlight as the
Data Plus 2 checks its display functions and battery voltage to ensure that ev-
erything is working correctly.
Upon activation, the Data Plus 2 will also check the ambient barometric pres-
sure, and calibrate its present depth as zero. At elevations of 2,000 ft. (610 m)
or higher, it will recalibrate itself to measure depth in feet of fresh water in-
stead of feet of sea water.
If no dive is made within 2 hours after initial activation, the Data Plus 2 will
automatically deactivate to conserve its battery power. Always check the
display before entering the water to ensure that it is activated.
SURFACE MODE
Surface Mode, identified by the Surface Time icon (Fig. 12a), immediately fol-
lows Diagnostic Mode after initial activation. Information displayed includes
the Dive Number '0' (no dive made yet) and Surface Time with flashing colon.
Fig. 11 - Diagnostic Mode
Fig. 12 - Surface Mode
a
O
2
M
FT
FT
MAX
M
N
O
D
E
C
O
C
.
Z
.
D
E
C
O
C
.
Z
.
O
2
MAX