Specifications

^^^HX\HS\UNJVTTPSP[HY`HUKWYVMLZZPVUHS
(8<(3<5.4030;(9@796-,::065(3)<@,9:.<0+,
REGULATORS
Regulators
|
5
For 2013, the entire range of XTX regulators has undergone a refresh. New cos-
metics coupled with great new features will continue to make Apeks the brand most
chosen by serious divers.
Fresh new look across the entire range
Optional 5th port available for every model with the additional bonus of an inte-
grated heat exchanger on the XTX200 and XTX100 rst stages.
Braided exi hoses are now standard on all models. These hoses are lighter
weight, more exible and more durable
Following on the success of the anti-bacterial mouthpiece, anti-bacterial additive
has now been molded into most second stage components. This is especially
useful with shared equipment by providing added protection against bacteria.
The purge buttons are now larger and easier to operate. A 2-stage progressive
purge is used. Press the purge on the side for a lower ow rate, useful where
more control is required such as lling lift bags etc, then press in the center for the
full effect of the purge, i.e. when regulator clearing etc.
A new larger venturi lever has been added with a soft touch rubber grip, which
makes it easier to locate and use.
New XTX Regulators
Tungsten XTX
The XTX Tungsten is built upon the XTX200 platform but with a truly unique, added
feature: it is protected with a hard, durable PVD (Physical Vapor Deposition) nish.
This tough-as-nails nish is better than traditional chrome plating. The coating is made
of high quality grades of Titanium, Zirconium and Chromium. The result is not only rich,
but protects your investment from normal diving abuse.
Features the innovative Diver Changeable Exhaust (DCE) System allowing the
diver to change from a large exhaust tee to a smaller exhaust tee. The larger
exhaust tee provides the best exhaust bubble dispersion while the smaller tee
is lighter weight and compact, both are included with the regulator.
The XTX Tungsten can be converted from a right handed hose configuration
to a left handed one. The process of changing the regulator to a left handed
conguration is both quick and simple. However this procedure MUST only be
performed by an Apeks Authorized Service Technician
The ergonomic venturi lever of the XTX range has
been designed to reduce the amount of grit ingress
Available in yoke or din conguration
The silicone exhaust valve used on the XTX demand regulator
range improves the breathing performance of the regulator.
Compatible with EAN40 new, out of the box
Part # Description
AP0335F XTX TUNGSTEN
AP0335F-1 XTX TUNGSTEN - DIN