Specifications

^^^HX\HS\UNJVTTPSP[HY`HUKWYVMLZZPVUHS
(8<(3<5.4030;(9@796-,::065(3)<@,9:.<0+,
BC’S & ACCESSORIES
BC’s & Accessories | 37
^^^HX\HS\UNJVTTPSP[HY`HUKWYVMLZZPVUHS
(8<(3<5.4030;(9@796-,::065(3)<@,9:.<0+,
Model Size Height Weight Waist Range Over the Shoulder Total Weight Releaseable Weight Lift in Pounds Lift in Newtons
PRO QD M
XS 5-5’5 100-125 25-37 32-38 20/9 20/9 27 120
S 5’2-5’7 120-155 27-42 34-40 28/13 20/9 30 130
M 5’7-5’10 150-165 30-45 39-45 30/13.5 20/9 35 150
ML 5’10-6’0 160-190 32-47 41-47 30/13.5 20/9 38 160
L 6’0-6’2 180-210 35-50 43-49 42/19 32/14.5 47 200
XL 6’2-6’5 195-240 37-52 45-51 42/19 32/14.5 61 270
XXL 6’2-6’5 230-270 44-59 45-51 42/19 32/14.5 61 270
BC Size Guide & Lift Capacity
* THE FIGURES IN THIS GUIDE ARE APPROXIMATE, NOT ABSOLUTE.
Measurement Instructions
Waist size in men is normally measured by placing the measuring tape around the waist,
cresting the pelvic bone. This measurement is not accurate for BC tting. The waist size
in men should be measured at the height of the belly button just above the pelvic bone
(Figure 1). Women’s waist size is always measured just above the pelvic bone (Figure
1). This same measurement applies for BC tting.
Over The Shoulder (OTS) measurement is taken by placing the measuring tape across
either the right or left shoulder and reading the distance between the top of the waist line
on the back to the top of the waist line in the front (Figure 2). Again, for this measure-
ment in men the waistline is taken to be at the height of the belly button. When tting
the customer in his/her respective waist size and OTS range, inquire what thickness of
wetsuit the BC is most likely to be worn with. Calculate about a 2” allowance for the waist
measurements for thick, cold water suits.
FIGURE 1: Measuring points for waist size. FIGURE 2: Measuring points for OTS length.
Men are measured at
waistline, rather than
normal belt line
• Line Lock feature for securing heavy objects
• Self-cleaning mechanism
• 31” cord with high force spring
• Multiple mounting options:
Can be attached inside pocket or clipped onto BC
• Removable J-clip attaches to console for
attachment to exterior of BC
• Snap clip attaches to D-ring
• Console pack comes with additional threaded stud mount
• Connect to console with either a split ring or adjustable lanyard
• Designed to survive extended salt water and chlorine exposure
• Stainless steel spring and hardware
• 60 lbs. breaking strength
Steel key-ring or plastic J-clip may
be attached to cord end.
• Self-cleaning mechanism
• 42" cord with high force spring & 12 oz. retraction force
• Attaches inside BC pocket, but cannot be clipped onto a BC
• Recommended for attachment of ashlights or cameras
Part # Description
D745915 Compact Retractor Kit
Part # Description
D745914 Retractor Plus Kit
Part # Description
D745034 Retractor Kit
Compact Retractor Kit
Retractor Plus Kit
Retractor Kit