Specifications

^^^HX\HS\UNJVTTPSP[HY`HUKWYVMLZZPVUHS
(8<(3<5.4030;(9@796-,::065(3)<@,9:.<0+,
BC’S & ACCESSORIES
BC’s & Accessories | 29
This simple, yet strong, harness can take the load of a fully rigged technical diver. It can
be easily customized with the hardware of your choice.
• 12’ of solid 2” (5cm) webbing with center grommet
• 2” (5cm) wide crotch strap
• 6 stainless 2” (5cm) D-rings
• Includes neoprene shoulder protectors
• 2 elastic retaining loops on shoulders and one on crotch strap
• Heavy duty stainless waist buckle
• 6 stainless serrated retainers
• Tank bands, p/n 28228, not included
*
BACK PLATE NOT INCLUDED WITH
DELUXE WEBBED HARNESS
The backbone of any system - this cleverly designed back plate can be used with the
webbed harness or inserted into the WTX Harness.
• Offered in either 304 stainless steel or 6061 anodized aluminum alloy
• The stainless steel weighs approx 5 lbs (2.2 kg)
• The aluminum weighs approx 1 lb 11oz (753g)
• 4 each upper and lower slots accommodate nylon cylinder bands so a single
cylinder can be strapped directly to the plate. Having a series of 4 slots provides
lateral stability of the cylinder that traditional 2 slot plates cannot
• 3 holes at the top of the plate offer a range of height adjustments
for the buoyancy cells and the cylinders. In addition, a corresponding
lower center slot allows for lower band bolts that are misaligned
• 2” wide crotch strap slot
• Upper and lower perimeter holes along either side and holes along the bottom
allow for the mounting of accessories
• Both offer an electro-plate nish and a laser-etched Apeks logo to
enhance the look of the plate
Deluxe One-piece Webbed Harness
WTX Backplate - Steel or Aluminum
STA Mounted
on Cylinder
WTX Single Tank Adapter (STA)
The single tank adapter is a great way to quickly attach a single cylinder to
a back plate or the WTX harness.
• Made of 316 stainless steel
• Weighs 1 lb. 1 oz. (490g) without hardware
• Comes with 2 sets of bolts and one pair of washers and wing nuts
• 1” bolts for directly mounting to back plate
• 1.5” bolts for mounting to back plate inside WTX harness
• Nylon tank bands are not included and may be purchased separately (p/n
28228)
Part # Description
388040 Deluxe Webbed Harness
Part # Description
388029 WTX Single Tank Adapter
Part # Description
388030 WTX Steel Back Plate
388028 WTX Aluminum Back Plate