User's Manual

MIL-PRF-46374G
11
4.5.2 Conformance inspection, radiological. Inspection, if applicable, shall be in accordance with
table VI.
TABLE VI. Conformance inspection, radiological.
Characteristic Requirement Test
Contamination 3.6.1 4.6.4.1
Diffusion 3.6.3 4.6.4.2
4.5.3 Conformance inspection, materials and design. Inspection shall be in accordance with table
VII.
TABLE VII. Conformance inspection, materials and design.
Requirement
Characteristic Type I Types II and III Test
Classes
1, 2, 3
Class 4 Classes
1, 2, 3
Class 4
Design 3.4 3.4 3.4 3.4 4.6.5
Design approval 3.4.1 3.4.1 3.4.1 3.4.1 4.6.5.1
Mechanical power --- 3.4.2.1.1 --- 3.4.2.1.1 4.6.5.2
Jewel bearings --- --- --- 3.4.2.12 4.6.5.3
Electrical power 3.4.2.2 --- 3.4.2.2 --- 4.6.5.4
Hand adjustment 3.4.3 3.4.3 3.4.3 3.4.3 4.6.5.5
Hand setting 3.4.3.1 3.4.3.1 3.4.3.1 3.4.3.1 4.6.5.5.1
Second hand stop
mechanism
3.4.3.2 3.4.3.2 3.4.3.2 3.4.3.2 4.6.5.5.2
Elapsed time ring
(Type III only)
--- --- 3.4.4 3.4.4 4.6.5.6
Case bars --- --- 3.4.5 3.4.5 4.6.5.7
Case markings 3.4.8 3.4.8 3.4.8 3.4.8 4.6.5.8