User guide

28
Status LED and Troubleshooting
Understanding the Status LED
Status LED
Status (Engine On)
Status (Engine Off)
No
illumination for
more than 1
minute
No vehicle power to
device or Device failure
Module will enter
Deep Sleep after
typically 5-10 days
of no vehicle
activity. Start
engine or move
vehicle to wake up
device
No vehicle power
to device or Device
failure – (see
Troubleshooting)
Solid White
Module currently
activating on wireless
network
Module currently
activating on wireless
network
Solid Blue
Module waiting for first-
time vehicle setup after
plug-in. CAUTION:
Engine must be OFF
and ignition ON before
pressing Function
button.
Module waiting for first-
time vehicle setup after
plug-in. CAUTION:
Engine must be OFF
and ignition ON before
pressing Function
button.
Solid or
Blinking
Green
On wireless network
Idle/dormant (3 blinks
every 30 seconds)
Ready, no data
activity (solid green)
Data activity (blinks
with data activity)
On wireless network
Ready, no data
activity (solid green)
Data activity (blinks
with data activity)
Solid or
Blinking
Yellow
On roaming network
Idle/dormant (3 blinks
every 30 seconds)
Ready, no data
activity (solid yellow)
Data activity (blinks
with data transfer)
On roaming network
Ready, no data
activity (solid yellow)
Data activity (blinks
with data transfer)
Solid Red
No Wireless Service
NA
Blinking Red
Transmitting Keyfob
Command to Vehicle
(2 blinks)
User-initiated
vehicle scanning in
process (1 blink per
second) –
CAUTION: NOT
RECOMMENDED
WITH ENGINE
RUNNING
Transmitting
Keyfob Command
to Vehicle (2 blinks)
User-initiated
vehicle scanning
in process (1
blink per second)
– CAUTION: DO
NOT START
ENGINE