User guide

12
Step 6: Verify Module Setup
• Start the engine and let it run for at least 30
seconds.
• Stop the engine and wait at least 20 seconds.
You are now ready to access your vehicle information
using the Delphi Connect app.
Finish Setup Using the Delphi Connect App
• Open the Delphi Connect app and, if needed,
Sign In using the Username and Password you
created in Step 2. See page 8.
• You should see the Dashboard screen. If not,
tap the Retry button.
• If you still do not see the Dashboard screen, go
to the Troubleshooting section of this guide.
Congratulations, you have
completed setting up your
module.