User Manual

29
Describe "WPS Status Bar" - "PIN - xxx" as follow :
1. A successful PIN Configuration :
Start PIN connection - SSID ~> Begin associating to WPS AP ~> Associated to WPS AP ~>
Sending EAPOL-Start ~> Sending EAP-Rsp (ID) ~> Receive EAP-Req (Start) ~> Sending
M1 ~> Received M2 ~> (Received M2D ~> Sending EAP-Rsp (ACK)) ~> Sending M3 ~>
Received M4 ~> Sending M5 ~> Received M6 ~> Sending M7 ~> Received M8 ~> Sending
EAP-Rsp(Done) ~> Configured ~> WPS status is disconnected ~> WPS status is connected
successfully-SSID
2. WPS configuration doesn't complete after two-minute connection :
WPS Eap process failed.
3. When Errors occur within two-minute connection, the WPS status bar might report on
"WPS Eap process failed".
Error messages might be :
1. Receive EAP with wrong NONCE.
2. Receive EAP without integrity.
3. Error PIN Code.
4. An inappropriate EAP-FAIL received.