User's Manual

Select "Use DHCP" if a dynamic IP is automatically assigned to you each time

you connect to the network.

Select "Use Static IP below" and type in the TCP/IP information if you are

assigned a fixed IP address. Configuring the TCP/IP settings in this page will have

the same effect as modifying the TCP/IP settings with Windows' Control Panel

except the changes will immediately become effective without rebooting the PC.

Consult your network manager to obtain the correct TCP/IP information.

[Site Survey]

This page shows a list of SSIDs in your vicinity. Information regarding each SSID is also

shown: SSID, signal strength, signal channel, BSSID (MAC address), data rate, and WEP

status (on or off).

[Refresh] will scan the vicinity of a certain amount of time and display the scan results.

[Strong Scan] will continuously scan the vicinity every 2.5 seconds until you click on [Stop],

which appears in place of [Strong Scan] when scanning.