User's Manual

Radio On/Off

This indicates the wireless operating status. The wireless can be turned on or off by the slide

switch. When the radio is on, the following parameters are in effect.

Wireless Mode

If all of the wireless devices you want to connect with this router can connect in the same

transmission mode, you can improve performance slightly by choosing the appropriate "Only"

mode. If you have some devices that use a different transmission mode, choose the

appropriate "Mixed" mode.

Wireless Network Name (SSID)

When you are browsing for available wireless networks, this is the name that will appear in the

list (unless Visibility Status is set to Invisible, see below). This name is also referred to as the

SSID. For security purposes, it is highly recommended to change from the pre-configured

network name.

Frequency (Channel)

A wireless network uses specific channels in the wireless spectrum to handle communication

between clients. Some channels in your area may have interference from other electronic

devices. Choose the clearest channel to help optimize the performance and coverage of your

wireless network.