User Manual

62
Tools_System
This section allows you to manage the router's configuration settings, reboot the router, and restore
the router to the factory default settings. Restoring the unit to the factory default settings will erase all
settings, including any rules that you've created.
Save To Local Hard Drive
This option allows you to save the router's configuration to a file on your computer. Be sure to save the
configuration before performing a firmware upgrade.
Load From Local Hard Drive
Use this option to restore previously saved router configuration settings.
Restore To Factory Default
This option restores all configuration settings back to the settings that were in effect at the time the router was
shipped from the factory. Any settings that have not been saved will be lost. If you want to save your router
configuration settings, use the Save Settings option above.
Reboot The Device
This restarts the router. Useful for restarting when you are not near the device.