User Manual

56
Gateway Name
The name of the router can be changed here.
Inactivity Time Out
If the router does not detect any administrative activity (from WAN or LAN) during this number of minutes, it
logs the adminstrator off.
Enable HTTPS Server
Enabling this option makes it possible to perform remote management with the Secure HTTP (HTTPS)
protocol.
Enable Remote Management
Enabling Remote Management allows you to manage the router from anywhere on the Internet. Disabling
Remote Management allows you to manage the router only from computers on your LAN.
Remote Admin Port
The port that you will use to address the management interface from the Internet. For example, if you specify
port 1080 here, then, to access the router from the Internet, you would use a URL of the form:
http://my.domain.com:1080/ .
Use HTTPS
Setting this option requires all remote administration to use the Secure HTTP (HTTPS) protocol. For example,
if you specify port 1080 above, then, to access the router from the Internet, you would use a URL of the form:
https://my.domain.com:1080/ .
Remote Admin Inbound Filter
Select a filter that controls access as needed for this admin port. If you do not see the filter you need in the list
of filters, go to the Advanced → Inbound Filter screen and create a new filter.