User Manual

that generate extreme RF noise.

Getting Started

For a typical wireless setup at home, please do the following:

1. You will need broadband Internet access (a Cable or DSL-subscriber line into your home or

office)

2. Consult with your Cable or DSL provider for proper installation of the modem.

3. Connect the Cable or DSL modem to the WRT-383U V1.1 Wireless Broadband Router

(WAN port).

4. Ethernet LAN ports of the WRT-383U V1.1 are Auto MDI/MDIX and will work with both

Straight-Through and Cross-Over cable.

Using the Configuration Menu

Whenever you want to configure your WRT-383U V1.1, you can access the Configuration Menu

through your PC by opening the Web-browser and typing in the IP Address of the WRT-383U V1.1.

The WRT-383U V1.1’s default IP Address is http://192.168.0.1

 Open the Web browser.

 Type in the IP Address of the Router (http://192.168.0.1).