User's Manual

38
1. Click the drop-down arrow at Security Mode and choose WPA-PSK.
2. Click the drop-down arrow at Encryption Method and choose TKIP or AES. (Most access
points use TKIP for WPA-PSK.)
3. At PSK Passphrase enter the same pass phrase used to configure the WPA-PSK on your
access point.
C
ONFIGURING 802.1X
You need to know if your access point supports 802.1X and then apply the configuration here.
1. Choose the EAP method under Authentication protocol.
2. Options for User Information depend on the EAP method chosen.
C
ONFIGURING 802.1X – PEAP
Refer to the following to configure PEAP.