User's Manual

15
The Link Information pane provides information on your current connection. This same pane is
shows at the bottom of all screens so you are always aware of your connection status. l
A profile is a record of the configuration you use to connect to a particular access point. Without
profiles, you would have to reconfigure the WPC-360A each time you change access points.
Using the Profile screen you can configure the WPC-360A to access your home network and your
office network. Each configuration is saved as a profile. Then when you go from the office to your
home you just select the appropriate profile.
C
REATING A P ROFILE
Refer to the following to add a profile.
1. Click Profile.
WHEN THE WPC-360A IS NOT CONNECTED TO YOUR COMPUTER, MOST
SETTINGS IN THE
WIRELESS CLIENT UTILITY ARE UNAVAILABLE. SETTINGS OR
BUTTONS THAT ARE NOT AVAILABLE ARE GRAYED OUT.
Working with Profiles
NOTE
Y
OU CAN CHANGE PROFILES WITHOUT REBOOTING YOUR COMPUTER. IF YOU
USE
WINDOWS CONTROL PANEL TO CONFIGURE YOUR CONNECTIONS, YOU
MUST REBOOT THE COMPUTER WHEN CHANGING ACCESS POINTS.
NOTE