User's Manual

7
1) Click on [Add] and the following screen will appear.
2) On this screen you will insert some basic settings for your wireless network.
a. [Profile Name] Enter in a descriptive name for this profile.
b. [Network Mode] If connecting to an access point or wireless router, choose “Infrastructure”
3
.
If you are going to network one computer directly to another computer without an access point,
then choose “Ad-Hoc”
4
.
c. [SSID] Select [Browse] The utility will perform a brief site survey and display the results to you.
Click on the SSID5 of the access point you would like to connect to and
3
Infrastructure: You will need an access point to use the Wireless CardBus Card in Infrastructure
mode. Because all communication will be done via the Access Point, the Access Point’s SSID must
be used.
4
Ad-Hoc: In Ad-Hoc mode communication is made peer-to-peer between the client PCs and
without the use of an Access Point. All PCs communicating in an Ad-Hoc should use the same
SSID (whatever your choice is).