User Manual

Getting Started

For a typical wireless setup at home, please do the following:

1. Plug the power adapter to outlay, and connect the power jack to the WAP-200A.

2. Connect the Ethernet LAN port of the WAP-200A to your PC.

3. Open your web browser, and type

http://192.168.0.100 to login WAP-200A.

4. When the authentication window is popped up, type the admin for the username, and leave the

password as blank, then type enter to login the web page of the WAP-200A.

5. Configure the desired wireless setting.

6. Connect the Ethernet port of the WAP-200A to your router.