Quick Start Guide

QUICK START GUIDE

u-line.com

3. Locate water valve inlet.

4. Break away filler feature

in bushing with flat

screwdriver.

5. Thread water line

through back panel hole

(with bushing).

6. Locate water valve inlet

and connect to valve.

7. Turn on water supply

and check for leaks.

8. Reinstall back panel.

9. Install retaining clip.

CLEAR ICE MACHINES

1. Turn off water supply and disconnect electrical supply

to product prior to attempting installation.

2. Remove the grille/access panel in the front and the

back panel.

3. Locate water

valve in the front

of the unit and

thread water

supply line

through.

Route the water

supply line

through the unit

so it does not

come into contact with any internal components

other than the solenoid valve. Normal operation

creates some vibration. A water supply line

contacting an internal component or cabinet wall

can cause excessive noise during operation or

damage to the line.

Remove

ZLWKɠDW

screwdrive