Accessory Tap Kit Guide

12
14 - 1⁄4”
To front face
of unit
7 - 1⁄2“
To side of unit
1⁄4” HOLE
2-3⁄4” HOLE
Template for Countertop Installation
WARNING: TO PREVENT IRREPARABLE DAMAGE TO YOUR COUNTERTOP,
DO NOT USE TEMPLATE UNTIL IT HAS BEEN VERIFIED. DO THE FOLLOWING:
1. Measure the inch scale
2. Line up the tower to template
3. If this template cannot be veried, DO NOT USE. Use measurements only.
1 Inch
WARNING: DO NOT USE THIS TEMPLATE UNTIL IT HAS BEEN VERIFIED - (SEE ABOVE)