user guide_and_service_manual

USER GUIDE
Cutout & Product Dimensions
u-line.com
Cutout & Product Dimensions
PREPARE SITE
Your U-Line product has been designed for either free-
standing or built-in installation. When built-in, your unit
does not require additional air space for top, sides, or
rear. However, the front grille must NOT be obstructed,
and clearance is required for an electrical connection in
the rear.
CAUTION
!
Unit can NOT be installed behind a closed
cabinet door.
If you would like to align the face of the unit
with other adjacent cabinet doors, you may need
to alter the wall just behind the drain connection
on the unit to accommodate the drain.
CUTOUT DIMENSIONS
PRODUCT DIMENSIONS
REAR
4"
(102 mm)
7"
(178 mm)
24"
(610 mm)
24"
(610 mm)
34 ΍ȟΞ"
(867 mm)
to
35 ΍ȟΞ"
(892 mm)
Preferred location
for electrical outlet
is in adjacent
cabinet.
Α/Ξ"
(16 mm)
23 ⁄”
(608 mm)
23 ⁄”
(600 mm)
21 ⁄”
(548 mm)
15”
(381 mm)
15”
(381 mm)
3 ⁄”
(91 mm)
34” to 35”
(864 mm to
889 mm)
TOP
FRONT
SIDE
⁄ ”
(6 mm)
25 ⁄”
(637 mm
10 ⁄”
(273 mm
17”
(432 mm
11 ⁄”
(295 mm
7 ⁄”
(184 mm
1”
(25 mm
23 ⁄”
(591 mm
18 /”
(476 mm)
41
⁄”
(1046 mm)
9 ⁄”
(240 mm)
20
⁄”
(581 mm)
Power Cord
6 ft (183 cm)
6 ⁄”
(162 mm)
3 ⁄”
(98 mm)
8