QUICK START GUIDE Marine ● 115V ● 21” Refrigerator Ice 30680 Rev_A
QUICK START GUIDE USER GUIDE u-line.com WELCOME TO U-LINE Congratulations on your U-Line purchase. Your product comes from a company with over five decades of premium modular ice making, refrigeration, and wine preservation experience. U-Line creates products focused on functionality, style, and inspired innovations — paying close attention to even the smallest details. Applications include residential, outdoor, ADA height compliant, marine, and commercial.
QUICK START GUIDE u-line.com This Quick Start Guide covers the basics of installation and general use of your product.
QUICK START GUIDE u-line.com Safety and Warning NOTICE ! DANGER Please read all instructions before installing, operating, or servicing the appliance. Service must be done by factory authorized service personnel. Any parts shall be replaced Use this appliance for its intended purpose only and follow with like components. Failure to comply could these general precautions with those listed throughout this increase the risk of possible ignition due to guide: incorrect parts or improper service.
USER GUIDE QUICK START GUIDE USER GUIDE Environmental Requirements Electrical This model is intended for indoor/interior applications only u-line.com u-line.com ! WARNING and is not to be used in installations that are open/ exposed to natural elements. SHOCK HAZARD — Electrical Grounding Required. Never attempt to repair or perform This unit is designed to operate between 50°F (10°C) and maintenance on the unit until the electricity has 100°F (38°C).
USER GUIDE QUICK START GUIDE Water Hookup u-line.com u-line.com (Ice maker models only) ! CAUTION PREPARE PLUMBING Do not use any plastic water supply line. The line The water valve uses a standard 1/4" (6.35 mm) is under pressure at all times. Plastic may crack compression fitting. U-Line recommends using accessory or rupture with age and cause damage to your water hook up kit – part # 80-54674-00. The kit includes a home. 10' (3 m) braided flexible water supply line and a brass hose fitting.
USER GUIDE QUICK START GUIDE USER GUIDE 4. Break away filler feature Door Swing in bushing with flat screwdriver. u-line.com u-line.com Wall 2-1/8" Min. (54 mm) Remove ZLWK ɠDW screwdriver 5. Thread water line through back panel hole (with bushing). 90° Door Swing 6. Locate water valve inlet and connect to valve. Units have a zero clearance for the door to open 90°, 7. Turn on water supply when installed adjacent to cabinets. and check for leaks.
QUICK START GUIDE USER GUIDE u-line.com u-line.com Door Adjustments Remove arrow clips: 1. DOOR ALIGNMENT AND ADJUSTMENT With a puddy knife or other flat tool, gently pry each arrow clip from hinge mounting holes. Align and adjust the door if it is not level or is not sealing 2. properly. If the door is not sealed, the unit may not cool Set aside arrow clips to be reused on the opposite side. properly, or excessive frost may form in the interior.
QUICK START GUIDE USER GUIDE USER GUIDE Remove bottom hinge: Door Latch 1. Remove bottom hinge from cabinet using a 1/4” u-line.com The door latch assembly included with your unit can socket. be installed to prevent the door from opening when the vehicle is in motion. To install, perform the following: 1. Remove the two outer most screws from the nonhinge side. 2. Place spacer (2) over mounting holes. Place latch (1) on top of spacer (2). 2.
USER GUIDE QUICK START GUIDE USER GUIDE General Installation INSTALLATION First Use LEVELING INFORMATION All are preset at cord. the factory. Initial startup 1. U-Line Plug incontrols the power/electrical requires no adjustments. 2. Gently push the unit into position. Be careful not to NOTICE u-line.com u-line.com entangle the cord or water line. NOTICE Because these units do not have leveling legs, 3.
QUICK START GUIDE USER GUIDE u-line.com Airflow and Product Loading NOTICE Restricting airflow may result in poor product AIRFLOW performance, product failure, and uneven internal External temperatures and may freeze contents.
QUICK START GUIDE u-line.com Interior Adjustments INTERIOR SHELVES Removing and Installing Interior Shelves 3 1 2 For models equipped with glass shelves having recessed shelf supports, remove the shelves as follows: 1. Pull shelf out about 6” (1), until back of shelf clears the “hump” on the right-hand side. 2. Tilt up right-hand edge of shelf (2). 3. Remove shelf from unit by pulling out (3). Insert the shelves as follows: 1.
USER GUIDE QUICK START GUIDE u-line.com u-line.com Ice ! CAUTION ICE MAKER OPERATION NEVER use an ice pick, knife or other sharp When the ice bucket is full, the ice making mechanism will instrument to separate cubes. Shake the ice shut off. However, the refrigeration system will continue bucket instead. to cool and maintain the ice supply. During periods of limited use or high ambient NOTICE temperatures, it is common for cubes to fuse together.
USER QUICKGUIDE START GUIDE u-line.com u-line.com ICE MAKER ADJUSTMENT 3. Turn the adjusting screw toward the minus (-) sign (clockwise) for smaller cubes or toward the plus (+) Ice Cube Thickness Adjustment sign (counterclockwise) for larger cubes. Interval - As Required 4. Install the ice maker assembly cover. On ice maker equipped models, adjust the cube size by changing water amount injected into the ice maker assembly as follows: ADJUSTING ICE HARVEST 1.
USER GUIDE QUICK START GUIDE u-line.com u-line.com Cleaning To clean integrated panels, use household cleaner per the cabinet manufacturer’s recommendation. Stainless Models Stainless door panels and handles can discolor when INTERIOR CLEANING exposed to chlorine gas, pool chemicals, saltwater or Disconnect power to the unit. cleaners with bleach.
USER QUICKGUIDE START GUIDE u-line.com u-line.com NOTICE The drain pan was not designed to capture the water created when manually defrosting. To prevent water from overflowing the drain pan and possibly damaging water sensitive flooring, the unit must be removed from cabinetry. To defrost: 1. Disconnect power to the unit. 2. Remove all products from the interior. 3. Prop the door in an open position (2 in. [50 mm] minimum). 4. Allow the frost to melt naturally. 5.
U-Line Corporation (U-Line) Limited Warranty One Year Limited Warranty For one year from the date of original purchase, this warranty covers all parts and labor to repair or replace any part of the product that proves to be defective in materials or workmanship. For products installed and used for normal residential use, material cosmetic defects are included in this warranty, with coverage limited to 60 days from the date of original purchase.
