Owner's Manual
3
Install Tower on Keg Refrigerator
Note: Save gasket and cap plug for conversion back to a standard refrigerator.
Note: These instructions are designed for a standard 36" countertop application.
tower is installed.
2. Insert tap assembly tubing through the provided gasket and then all the way into the refrigerator.
3. Insert and tighten four screws to secure tower to keg refrigerator.
4. Install faucet onto the tower: Line up teeth on the outside of the faucet with the teeth inside the shank.
6. Screw the handle onto the faucet.
5. Screw the coupling nut onto the faucet and tighten with the faucet wrench.