Owner's Manual

8
Beverage Line Cleaning
You will need:
1. Cleaning Kit
Included: 1-quart cleaning pump
1 package of cleaning detergent
Faucet wrench
Faucet brush
2. Clean bucket
3. Fresh water
1. Close
CO
2
tank.
2. Pull pin on coupler to release pressure from keg.
3. Remove tap coupler from keg.
4. Remove
CO
2
line from tap coupler.
 
• Push base of coupler inward and rotate clockwise.
6. Open cleaning pump.
 
Closed
Pin
Open
8. Reassemble pump.
Continued on
next page