USER GUIDE & SERVICE MANUAL Model: UHRI124-IS01A
USER GUIDE & SERVICE MANUAL Table of Contents Installation Integrated Panel Dimensions Integrated Panel Installation Grille Installation u-line.
USER GUIDE u-line.com WELCOME TO U-LINE Congratulations on your U-Line purchase! Your product comes from a company with decades of premium modular ice making, refrigeration, and wine preservation experience. U-Line creates products focused on functionality, style, and inspired innovations — paying close attention to even the smallest details. Applications include residential, outdoor, ADA height compliant, marine, and commercial.
USER GUIDE Integrated Panel Dimensions u-line.com u-line.com 2. Optional: Stain or Finish panel to desired stain or color. Be sure to closely follow the instructions provided by INTEGRATED PANEL NOTICE the manufacturer. 3. Optional: Install handles and hardware. Due to differences in surrounding cabinetry the panel may not perfectly align with door.
USER GUIDE u-line.com u-line.com Integrated Panel Installation 1. Fully open door/drawer. NOTICE Due to differences in floor construction or surrounding cabinetry, the panel may not sit flush with the top of the door/drawer. 2. Starting at corner, pull gasket away from door/ drawer. Panel Door 3. Continue to pull gasket free from gasket channel. 4. Upon removal, lay gasket 9. Secure integrated down on a flat surface. panel to door/drawer Bar Clamp using clamps. A robust tape may also 5.
USER GUIDE u-line.com u-line.com 12.Using a Phillips screwdriver, place one screw into each of the 6 pilot holes and screw down. Do not overtighten screws. 13.Be sure the screws force their way past the opening on the gasket channel and sit flush against the bottom of the channel. Integrated Panel Integrated Panel 14.Remove clamps from door/drawer. NOTICE If panel requires additional adjustment after removing clamps, slightly loosen each screw and adjust panel as necessary.
USER GUIDE u-line.com Grille Installation REMOVING AND INSTALLING GRILLE ! WARNING Disconnect electric power to the unit before removing the grille. When using the unit, the grille must be installed. ! WARNING DO NOT touch the condenser fins. The condenser fins are SHARP and can be easily damaged. Removing the grille 1. Disconnect power to the unit. 2. Loosen the two screws (1). 3. Remove grille (2) from unit. Installing the grille 1.
